Lost impression share due to budget

Stawki w kampanii przekraczające limit budżetu – ilustracja

Since 17 August 2026, a Google Ads campaign with a target CPA or target ROAS that loses impressions due to budget pays more for conversions than it needs to. This article shows you how to assess the scale of the problem and how to fix it.

What changed in August 2026

Until August 2026, a campaign with a CPA or ROAS target that was short on budget usually beat its target. The system picked cheaper auctions, since it did not need to spend so aggressively. A lower CPC meant a better CPA or ROAS, and the budget was still spent in full. 

According to Google’s announcement on the change to target-based bid strategies, since 17 August 2026 budget-limited campaigns with a target CPA, target ROAS or target CPC (Demand Gen) are optimised exactly to the target you set – even if the same budget could deliver a better result. 

The change applies to Search, Shopping, Performance Max, Demand Gen and Travel campaigns. It does not apply to App campaigns or Video campaigns.

Limited by budget = overpaying

For budget-limited campaigns, the system now bids up to the full target, including in auctions it used to win more cheaply. The budget runs out sooner, impression share drops even further, there are fewer conversions, and CPA or ROAS moves to exactly the value set as the campaign target – where it used to be better. 

The scale of the problem is shown by the “Search lost IS (budget)” metric. The higher it is, the more the campaign target is mismatched with the budget. If you now give the campaign a more ambitious ROAS/CPA target, you will get more conversions and revenue from the same budget.

How much you lose – the formula

Let:

  • U – impression share lost due to budget (20% means U = 0.2),
  • ε – elasticity, i.e. by how many percent the available number of conversions falls when you lower the target CPA by 1%.

The inefficiency G tells you by how many percent more conversions you will buy with the same budget once the target is adjusted, i.e. how much better the campaign results could be:

G = (1 − U)−1/(ε + 1) − 1

For target ROAS, the G calculated this way is also the target increase needed to reach balance. For target CPA, the required reduction is 1 − 1/(1 + G).

Price elasticity can be estimated from Google Ads Performance Planner data. By comparing scenarios, we can determine the relationship between growth in volume and growth in cost per conversion (or a drop in ROAS).

However, for a Google Ads campaign that is neither severely underfunded nor overfunded, elasticity is usually close to 1 (to increase conversion volume by 10%, we have to raise CPA by 10% as well). Under this assumption, the formula simplifies to:

G = (1 − U)−½ − 1

That is:

G = 1 / √(1 − U) − 1

With an impression share loss of U = 20%, we get G = 1/√0.8 − 1 = 11.8%. So you can raise the target ROAS by 11.8% (or lower the target CPA by 10.6%), and revenue or the number of conversions will grow by that much.

If you would rather skip the maths, for a moderate impression loss due to budget (U < 20%) you can use an approximation:

G ≈ U / 2

In other words, with a small impression loss, half of the impression share lost due to budget (½U) can serve as a first approximation of both the scale of the inefficiency and the ROAS/CPA target adjustment needed. This approximation understates the figure – the actual value is higher – but it still shows the scale of the problem.

Because the elasticity estimate is uncertain, each of the formulas above is in fact an approximation. You will need to adjust the target regularly anyway – successive iterations will correct any inaccuracies resulting from the approximate estimate.

You will probably never reach a perfect “once and for all” balance. Seasonal shifts in demand, a changing competitive landscape and an evolving auction mix will keep requiring you to adjust the target and the budget regularly.

What you gain – an example

This example shows how a tighter target translates into higher campaign efficiency. The campaign was meeting a target CPA of about PLN 29, but was losing 50% of impressions due to budget.

After the target CPA was lowered, ads showed in slightly lower positions, so CTR fell from 5.0% to 3.5%. However, the cost per click also fell – from PLN 2.00 to PLN 1.41. The campaign stopped losing impressions and, with the same PLN 1,000 budget, got 707 clicks instead of 500 and 49 conversions instead of 35.

Efficiency rose by 41% – exactly what the formula gives for U = 50%. CPA fell to PLN 20, i.e. by 29%. The example assumes the conversion rate does not change.

BeforeAfterChange
Impressions10,00020,000+100%
Search lost IS (budget)50%0%−50 pp
CTR5.0%3.5%−29%
Clicks500707+41%
CPCPLN 2.00PLN 1.41−29%
Conversion rate7%7%no change
Conversions3549+41%
BudgetPLN 1,000PLN 1,000no change
CPAPLN 29PLN 20−29%

What to do, step by step

Before adjusting the target, check that these conditions are met:

  1. The campaign loses impression share due to budget (the “Limited by budget” status and a significant Search lost IS (budget)).
  2. The budget is spent in full. Look at the whole month, not the last few days. If the campaign overspent its daily budget early in the month, it will spend less in the second half. It then looks as if it is not spending its budget, even though the limitation still applies.
  3. The campaign meets its target. Here too, look at a longer period and allow for conversion delay, i.e. the fact that some conversions will only be recorded later. Use the current and projected conversion data available in the interface.

If all three conditions are met, give the campaign a more ambitious ROAS/CPA target. It will have to bid less aggressively and buy traffic slightly cheaper, so the same budget will deliver a better result.

After each adjustment, check the metric again. The target is set right when the impression loss due to budget drops to zero and the budget is still being spent. If the budget is no longer spent in full, the target is too ambitious.

Alternative: drop the ROAS/CPA target

If you remove the ROAS/CPA target from the campaign, it will maximise results within the budget. In such campaigns the “Limited by budget” status will not appear – they adjust bids to the budget. This approach has two drawbacks, though:

  • You have no control over the campaign’s profitability. ROAS or CPA may fall short of your expectations if a better result is not achievable in a given period.
  • These bid strategies do not let you set a maximum CPC bid limit (this is available in portfolio strategies with a ROAS or CPA target).

Author

Date

Let's talk about your business.

Porozmawiajmy o Twoim biznesie